Laddermill: Information and Much More from Answers.com
| The subject of this article may not satisfy the notability
guideline or one of the following guidelines for inclusion on Wikipedia: Biographies,
Books, Companies, Fiction,
Music, Neologisms, Numbers,
Web content, or several proposals for new guidelines. If you are
familiar with the subject matter, please expand or rewrite the article to establish its notability. The best way to
address this concern is to reference published, third-party sources about the subject. If
notability cannot be established, the article is more likely to be considered for deletion, per . This article has been tagged since August 2007. |
A Laddermill is a kind of windmill, an "Airborne wind turbine", that consists of a "ladder", a long string or loop of "kites". The loop or string of kites on the ladder is launched in the air by the lifting force of the kites, until it is fully enrolled, and the top reaches a height of about 30.000 feet.
Operating modes
There are currently two operating modes considered:
- The kites pull up the long string on which they are tethered, and the resulting energy is then used to drive an electric generator. When the end of the string is reached the pull force of the kites is reduced by changing the angle of attack of the kites "wing shape", and the string is then rewound with the electric generator acting as a motor, or by other means. If the string is reduced to its minimum length the next energy generating cycle is started by restoring the angle of attack of the kites to maximum lift.
- Kites on one side of a wire loop generate lift while the ones on the other side do not because the Angle of attack of the kites "wing shape" changes when the kite passes the top of the loop. So the kites pull up only one end of an endless loop, causing the loop to start to rotate, and the resulting released energy is then used to drive an electric generator.
The "rotating loop" "LadderMill" project is designed and developed by the Dutch ex astronaut and Physicist Wubbo Ockels.
As quoted from his website:[1]
The LadderMill is the response to the challenge for exploiting the gigantic energy source contained in the airspace up to high altitudes of 10 km. The concept has been developed with the aim to convert wind energy at altitude in electricity on the ground in an environmental and cost effective manner.
External links
- The laddermill website of Wubbo Ockels.
- Website of the Delft University of Technology explaining the principle of the LadderMill project.
- paper "Design and Construction of a 4 kW Groundstation for the Laddermill".
‹ The template below (Sustainability and Energy Development) is being considered for deletion. See templates for deletion to help reach a consensus. ›
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)