sustainable architecture: Information and Much More from Answers.com
- ️Wed Jul 01 2015
Sustainable architecture applies techniques of sustainable design to architecture. From the root words sus– (under) + tenere (to hold); to keep in existence; to maintain or prolong. It is related to the concept of "green building" (or "green architecture"). The two terms, however are often used interchangeably to relate to any building designed with environmental goals in mind, often regardless of how they actually function in regard to such goals.
Sustainable architecture is framed by the larger discussion of sustainability and the pressing economic and political issues of our world. In the broad context, sustainable architecture, seeks to minimize the negative environmental impact of buildings by enhancing efficiency and moderation in the use of materials, energy, and development space.
Sustainable Energy
The passivhaus standard combines a variety of techniques and technologies to achieve ultra-low energy use.
Energy efficiency over the entire Life cycle of a building is the most important single goal of sustainable architecture. Architects use many different techniques to reduce the energy needs of buildings and increase their ability to capture or generate their own energy.
Heating, Ventilation and Cooling System Efficiency
The most important and cost effective element of an efficient heating, ventilating, and air conditioning (HVAC) system is a well insulated building. A more efficient building requires less heat generating or dissipating power, but may require more ventilation capacity to expel polluted indoor air.
Significant amounts of energy are flushed out of buildings in the water, air and compost streams. Off the shelf, on-site energy recycling technologies can effectively recapture energy from waste hot water and stale air and transfer that energy into incoming fresh cold water or fresh air. Recapture of energy for uses other than gardening from compost leaving buildings requires centralized anaerobic digesters.
Site and building orientation have a major effect on a building’s HVAC efficiency.
Passive solar building design allows buildings to harness the energy of the sun efficiently without the use of any active solar mechanisms such as photovoltaic cells or solar hot water panels. Typically passive solar building designs incorporate materials with high thermal mass that retain heat effectively and strong insulation that works to prevent heat escape. In addition, low energy buildings typically have a very low surface area to volume ratio to minimize heat loss. This means that sprawling multi-winged building designs (often thought to look more "organic") are often avoided in favor of more centralized structures. Traditional cold climate buildings such as American colonial saltbox designs provide a good historical model for centralized heat efficiency in a small scale building.
Windows are placed to maximize the input of heat-creating light while minimizing the loss of heat through glass, a bad insulator. In the northern hemisphere this usually involves installing a large number of south facing windows to collect direct sun and severely restricting the number of north facing windows. Certain window types, such as double or triple glazed insulated windows with gas filled spaces and low emissivity (low-E) coatings, provide much better insulation than single-pane glass windows. Preventing excess solar gain in the summer months is important to reduce cooling needs. Deciduous trees are often planted in front of windows to block excessive sun in summer with their leaves but allow light through in winter when their leaves disappear. Louvers or light shelves are installed to allow the sunlight in during the winter (when the sun is lower in the sky) and keep it out in the summer (when the sun high in the sky). Coniferous or evergreen plants are often planted to the north of buildings to shield against cold north winds.
In colder climates, heating systems are a primary focus for sustainable architecture because they are typically one of the largest single energy drains in buildings.
In warmer climates where cooling is a primary concern passive solar designs can also be very effective. Masonry building materials with high thermal mass are very valuable for retaining the cool temperatures of night throughout the day. In addition builders often opt for sprawling single story structures in order to maximize surface area and heat loss. Buildings are often designed to capture and channel existing winds particularly the especially cool winds coming from nearby bodies of water. Many of these valuable strategies are employed in some way by the traditional architecture of warm regions, such as southwestern mission buildings.
In climates with four seasons, an integrated energy system will increase in efficiency: when the building is well insulated, when it is sited to work with the forces of nature, when heat is recaptured (to be used immediately or stored), when the heat plant relying on fossil fuels or electricity is greater than 100% efficient, and when renewable energy is utilized.
Alternative Energy Production and Building Design
Active solar devices such as photovoltaic solar panels help to provide sustainable electricity for any use. Roofs are often angled toward the sun to allow photovoltaic panels to collect at maximum efficiency, and some buildings even move throughout the day to follow the sun. The Samundra Institute of Maritime Studies (SIMS)at Lonavala, near Pune India, has the longest photovoltaic wall in the world, at over ninety meters long. Undersized wind turbines (normal turbines are often over 250 feet) may have been oversold and do not always provide the returns promised, particularly for North American households[1]. Active solar water heating systems have long provided heating-specific energy in a sustainable manner. Occasionally houses that use a combination of these methods achieve the lofty goal of "zero energy" and can even begin generating excess energy for use in other structures.
Building placement
One central and often ignored aspect of sustainable architecture is building placement. Although many environmentalists envision the ideal home or office structure as an isolated place in the middle of the woods this kind of placement is often detrimental to the environment. First such structures often serve as the unknowing frontlines of suburban sprawl. Second isolated structures usually increase the energy consumption required for transportation and lead to unnecessary auto emissions. Ideally most building should avoid suburban sprawl in favor of the kind of light urban development articulated by the New Urbanist movement. Careful mixed use zoning can make commercial, residential, and light industrial areas more accessible for those traveling by foot, bicycle, or public transit, as proposed in the Principles of Intelligent Urbanism.
Sustainable Building Materials
Some examples of sustainable building materials include recycled denim or blown-in fiber glass insulation, sustainably harvested wood, bamboo, which is one of the strongest and fastest growing woody plants, and non-toxic low-VOC glues and paints.
Waste management
Sustainable architecture focuses on the on-site use of waste, incorporating things such as grey water systems for use on garden beds, and composting toilets to reduce sewage. These methods, when combined with on-site food waste composting and off-site recycling, can reduce a house's waste to a small amount of packaging waste.
Re-Using Structures and Materials
Some sustainable architecture incorporates recycled or second hand materials. The reduction in use of new materials creates a corresponding reduction in embodied energy (energy used in the production of materials). Often sustainable architects attempt to retro-fit old structures to serve new needs in order to avoid unnecessary development.
Social sustainability in architecture
Architectural design can play a large part in influencing the ways that social groups interact. Communist Russia's Constructivist Social condensers are a good example of this, buildings which were designed with the specific intention of controlling or directing the flow of everyday life to "create socially equitable spaces".
Sustainable design can help to create a sustainable way of living within a community. While the existing social constructs can be seen to influence architecture, the opposite can also be true. An overtly socially sustainable building, if successful, can help people to see the benefit of living sustainably; this can be seen in many of Rural Studio's buildings in and around Hale County, Alabama, for example. The same can be said for environmentally sustainable design, in that architecture can lead the way for the greater community.
Art can be a powerfully positive social force. It can help to reduce stress in many situations, lowering the risk of stress-related health problems, both physical and mental. Art can also be a way of individual expression, which can add to the community as a whole. Hundertwasser's buildings in Austria are an inspiring example of art giving back to the community.
Criticism
Sustainable Architecture, it can be argued, does not rigorously form a part of Architecture as a discipline. Rather it is a concern in Building Construction industry as a whole, and given the dominance of construction techniques and building subsystes, it should be considered a part of Civil Engineering as a discipline. Numerous schools of architecutre shun "Sustainable Architecture" as a part of their curriculun, and it is considered to be a Fashionable subject at the moment. A number of Architects practicing this type of architecture (see below) have been criticised as exploiting a dominant concern in the name of architecture just so as to gain reputability and garner profects.[citation needed]
Designers noted for their contribution to sustainable architecture
- Kirksey
- Tom Bender
- Laurie Baker
- Bill Dunster
- Eric Corey Freed
- Buckminster Fuller
- Dennis Holloway
- William McDonough
- Glenn Murcutt
- Edward Mazria
- Renzo Piano
- Sim Van der Ryn
- Walter Segal
- Michael Sorkin
- Brenda and Robert Vale
- James Wines
- Ken Yeang
- Hellmuth, Obata and Kassabaum
- White Design Associates[2]
- Ware Architecture
- ARQUA eco design South America
- Mithun
- Ashok "Bihari" Lall
- Anupam Shroff
- Charles Correa
- BV Doshi
- Tapan K Chakravarti
- Arunab Dasgupta
- Nikhil Sengupta
- PSR Raghavan
- MS Dhingra
- Mitchell Joachim
See also
- Windcatcher
- Building Automation
- Solar chimney
- Passive house
- Sustainable landscape architecture
- Superinsulation
- Vernacular architecture
- Zero energy building
- Organic architecture
- Green building
- Straw-bale construction
- Deconstruction (building)
- New Urbanism
- Principles of Intelligent Urbanism
- Low-energy house
- Fab Tree Hab: 100% Ecological Home
External links
- Sustainable Architecture information from the University of Michigan
- Green Architecture- Building with recycled materials
‹ The template below (Sustainability and Energy Development) is being considered for deletion. See templates for deletion to help reach a consensus. ›
| Modern Architecture Series |
|---|
| Modern architecture |
| Art Deco · Art Nouveau · Blobitecture · Brutalism · Constructivism · Critical regionalism · De Stijl · Deconstructivism · Expressionism · Functionalism · Futurism · Googie · High-tech · International style · Jugendstil · Mid-Century modern · Modernisme · New Objectivity · Organicism · Prairie School · Postmodernism · Streamline Moderne · Sustainable architecture |
| Related articles |
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)