Washington (U.S.)
- ️Sat Jul 02 2022
This page is part of © FOTW Flags Of The World website
Last modified: 2022-07-02 by rick wyatt
Keywords: washington | united states |
Links: FOTW homepage |
search |
disclaimer and copyright |
write us |
mirrors
image located by Ant�nio Martins-Tuv�lkin, 4 April 2018
based on
Washington Secretary of State website
- Legal Description
- Variant flags
- First flag of Washington
- Territorial Seal
- Specification of Design and Layout
- State Military Crest
- Flag More Costly
See also:
- County and Municipal Flags of Washington (index)
- Clickable map of Washington
- Washington Government and Department seals
- Freedom County (unofficial)
- Washington State University
- University of Washington
- Washington State Patrol
- Port of Vancouver
- Squaxin Island
- Orcas Island Yacht Club
- Clean Marina flag
- Yacht Club flags
- Sound Transit
- AYPE (Alaska-Yukon-Pacific Exposition)
- Cascadia
- United States of America
- States of the United States
External sites:
- Washington Secretary of State website
In 1890, five stars were added, representing Idaho, Montana, North Dakota, South Dakota and Washington, bringing the total number of stars on the U.S. flag to 43. There were thirteen stripes representing the thirteen original colonies.
Legal Description
REVISED CODE OF WASHINGTON
1.20.010 State Flag. The official flag of the state of Washington shall be of dark green silk or bunting and shall bear in its center a reproduction of the seal of the state of Washington embroidered, printed, painted or stamped thereon. The edges of the flag may, or may not, be fringed. If a fringe is used the same shall be of gold or yellow color of the same shade as the seal. The dimensions of the flag may vary.
1.20.080 State Seal. The seal of the state of Washington shall be, a seal encircled with the words: "The Seal of the State of Washington," with the vignette of General George Washington as the central figure, and beneath the vignette the figures "1889" and shall be composed as appears in the illustration.
Joe McMillan, 22 February 2000
Variant flags
image located by Ron Lahav, modified by Clay Moss, 14 November 2008
Source: Washington Secretary of State website
The dark green version is presented as a piece of historical information.
Clay Moss, 14 November 2008
[Many years ago] I wrote all of the Secretaries of State in each US state asking them for information on their specific state flags. The State of Washington sent me a very handsome specification sheet, richly printed on some kind of heavy stock glossy paper. On the front was an illustration of Washington's flag maybe 12 inches wide. On the back was all the pertinent information about the flag, much like what can be found at the http://www.secstate.wa.gov/flag. My spec sheet had been put together in 1969. The flag on that spec sheet is very
dark and is perhaps even darker than the 0-51-0 color that I have illustrated here.
When I lived in Clarkston, Washington, I saw one dark green sample of Washington's flag hanging in the community center in Asotin, Washington, just
down below Clarkston. It was the first sighting of only 2 dark green samples that I have seen. So, it leaves me wondering if at one time Washington's flag was actually darker or if there was an attempt to darken it that never really went anywhere.
Clay Moss, 14 November 2008
Washington State's flag is, by my understanding, green because its nickname is the "Evergreen State".
Edward Mooney, 15 November 2008
images (reverse and obverse) provided by Chris Bedwell, 9 March 2014
I recently acquired a fully sewn cotton flag of Washington State, in part because its appearance is so different from the flag I now encounter at stores. These two photos of the flag show the front and back/reverse. You can see the head is out of proportion to the shoulders, etc. (reminds me of a Bobblehead), and the area behind the George Washington depiction is just green instead of the light blue you see these days. Also, the perimeter of the seal is comprised of little yellow leaves arranged in a circle, and you'll see that the flag does not read correctly on the reverse - someone actually went to the effort to
appliqu� numbers and letters backwards. An interesting variant, I would say.
Chris Bedwell, 9 March 2014
image by BlinxCat, 27 May 2022
This Washington state flag is from a set of old 70s-80s era flags.
BlinxCat, 27 May 2022
First flag of Washington
The original Washington State flag differs from the one in use now. You can see it and read information here:
www.ga.wa.gov/visitor/virtualtour/tour.html, but you should go further, because the exact address doesn't appear on the bar. The image only: www.ga.wa.gov/visitor/virtualtour/images/capitol/13.jpg. Unlike other state flags, this one is vertical, more like gonfalon. See also the page at www.ga.wa.gov/visitor/virtualtour/stateflag-article.pdf, a period article (circa 1915) about the state banner, and
www.ga.wa.gov/visitor/virtualtour/stateflag-resolution.pdf, the state law about the flag.
Valentin Poposki, 10 July 2010
Territorial Seal
The territorial seal of Washington (1853) is posted at blogs.sos.wa.gov/FromOurCorner/index.php/2015/11/archives-tourney-game-7-1886-u-s-flag-vs-wa-territorial-seal/
Jens Pattke, 22 November 2015
Specification of Design and Layout
Source:www.secstate.wa.gov/flag/design.aspx?m=undefined,state1
The Legislature adopted the Washington State flag in 1925 and revised it to its present design in 1967 (RCW 1.20.010).
Color Specifications
The following color references by cable number (cloth) and Pantone number (Ink) are those colors in the Standard Color Card of America, Ninth Edition (second issue) of the Textile Color Card Association of the United States, Inc., New York and the Pantone Formula Guide, 1st Edition, 3rd Printing 2001, New Jersey. They are of colorfast washable dyes and substantially the same as the following color references:
- Flag Background - Irish Green, Cable #70,168, Pantone PMS 348
- State Seal Background -Oriental Blue, Cable #70,209, Pantone PMS 311
- State Seal (Portrait, lettering and inner rings) - Black
- Gold used in the state seal & fringe (if any) - Nugget Gold, Cable #70,215, Pantone PMS 116
- Face of George Washington - PMS 169 (Flesh Tint), Pantone PMS 169
State Seal Specifications
An official state seal must appear in the center of each side of the state flag. The seal may not have a serrated edge. Its size shall be selected in proportion to the size of the state flag.
Flag Size | Diameter of Seal |
3' x 5' | 19" |
4' x 6' | 25" |
5' x 8' | 31" |
In all other instances, the ratio of the state seal diameter to the length of the flag shall be 1:3.
submitted by Zachary Harden, 18 June 2002
State Military Crest
image by Joe McMillan, 21 April 2000
The state military crest, which is the crest used in the coats of arms of units of the National Guard, as granted by the precursor organizations of what is now the Army Institute of Heraldry. The official Institute of Heraldry blazon is
"A raven with wings endorsed issuing out of a ducal coronet all proper. [From the crest of George Washington.]"
Joe McMillan, 21 April 2000
Flag More Costly
Local flag manufacturers sell this flag for almost double the price of most other state flags because the seal is stitched on both the obverse and reverse of the flag (so that the lettering reads correctly on both sides). This is
something my reading up on flags in various books, plus the internet did not inform me about. It was something of a surprise.
Dean Thomas, 14 January 2002