Noise blanker, the Glossary
A Citizen's Band transceiver equipped with a noise blanker for the receiver, controlled by a button on the front panel (2nd from right) In the design of radio receivers, a noise blanker is a circuit intended to reduce the effect of certain kinds of radio noise on a received signal.[1]
Table of Contents
10 relations: Amplitude modulation, Communications receiver, Frequency modulation, Intermediate frequency, Intermediate-frequency amplifier, Noise reduction, Radio receiver design, Shortwave radio receiver, Single-sideband modulation, Transceiver.
- Receiver (radio)
Amplitude modulation
Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting messages with a radio wave.
See Noise blanker and Amplitude modulation
Communications receiver
A communications receiver is a type of radio receiver used as a component of a radio communication link. Noise blanker and communications receiver are receiver (radio).
See Noise blanker and Communications receiver
Frequency modulation
Frequency modulation (FM) is the encoding of information in a carrier wave by varying the instantaneous frequency of the wave.
See Noise blanker and Frequency modulation
In communications and electronic engineering, an intermediate frequency (IF) is a frequency to which a carrier wave is shifted as an intermediate step in transmission or reception. Noise blanker and intermediate frequency are radio electronics.
See Noise blanker and Intermediate frequency
Intermediate-frequency (IF) amplifiers are amplifier stages used to raise signal levels in radio and television receivers, at frequencies intermediate to the higher radio-frequency (RF) signal from the antenna and the lower (baseband) audio or video frequency that the receiver is recovering.
See Noise blanker and Intermediate-frequency amplifier
Noise reduction
Noise reduction is the process of removing noise from a signal.
See Noise blanker and Noise reduction
Radio receiver design
Radio receiver design includes the electronic design of different components of a radio receiver which processes the radio frequency signal from an antenna in order to produce usable information such as audio. Noise blanker and radio receiver design are radio electronics and receiver (radio).
See Noise blanker and Radio receiver design
Shortwave radio receiver
A shortwave radio receiver is a radio receiver that can receive one or more shortwave bands, between 1.6 and 30 MHz. Noise blanker and shortwave radio receiver are receiver (radio).
See Noise blanker and Shortwave radio receiver
Single-sideband modulation
In radio communications, single-sideband modulation (SSB) or single-sideband suppressed-carrier modulation (SSB-SC) is a type of modulation used to transmit information, such as an audio signal, by radio waves.
See Noise blanker and Single-sideband modulation
Transceiver
In radio communication, a transceiver is an electronic device which is a combination of a radio ''trans''mitter and a re''ceiver'', hence the name. Noise blanker and transceiver are radio electronics.
See Noise blanker and Transceiver
See also
Receiver (radio)
- Communications receiver
- Crystal radio
- Demodulation
- Direct-conversion receiver
- Junghans Mega
- List of communications receivers
- Low IF receiver
- Measuring receiver
- Neutrodyne
- Noise blanker
- Plath GmbH
- Preselector
- Radar warning receiver
- Radio receiver
- Radio receiver design
- Radio scanner
- Radio spectrum scope
- Reflex receiver
- Regenerative circuit
- Roofing filter
- S meter
- Shortwave radio receiver
- Software-defined radio
- Superheterodyne receiver
- Table radio
- Transistor radio
- Tuned radio frequency receiver
- Tuner (radio)