Pull-up resistor, the Glossary
In electronic logic circuits, a pull-up resistor (PU) or pull-down resistor (PD) is a resistor used to ensure a known state for a signal.[1]
Table of Contents
26 relations: Bipolar junction transistor, Cambridge University Press, CMOS, Combinational logic, Electrical impedance, Field-effect transistor, Ground (electricity), IC power-supply pin, Kirchhoff's circuit laws, Logic gate, Microcontroller, MOSFET, Ohm, Open collector, Paul Horowitz, Power supply, RC circuit, Resistor, Switch, The Art of Electronics, Three-state logic, Transistor, Transistor–transistor logic, USB-C, Voltage, Winfield Hill.
- Resistive components
Bipolar junction transistor
A bipolar junction transistor (BJT) is a type of transistor that uses both electrons and electron holes as charge carriers.
See Pull-up resistor and Bipolar junction transistor
Cambridge University Press
Cambridge University Press is the university press of the University of Cambridge.
See Pull-up resistor and Cambridge University Press
CMOS
Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss") is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFETs for logic functions.
Combinational logic
In automata theory, combinational logic (also referred to as time-independent logic) is a type of digital logic that is implemented by Boolean circuits, where the output is a pure function of the present input only.
See Pull-up resistor and Combinational logic
Electrical impedance
In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.
See Pull-up resistor and Electrical impedance
Field-effect transistor
The field-effect transistor (FET) is a type of transistor that uses an electric field to control the flow of current in a semiconductor.
See Pull-up resistor and Field-effect transistor
Ground (electricity)
In electrical engineering, ground or earth may be a reference point in an electrical circuit from which voltages are measured, a common return path for electric current, or a direct physical connection to the Earth.
See Pull-up resistor and Ground (electricity)
IC power-supply pin
IC power-supply pins denote a voltage and current supply terminals in electric, electronics engineering, and in integrated circuit design.
See Pull-up resistor and IC power-supply pin
Kirchhoff's circuit laws
Kirchhoff's circuit laws are two equalities that deal with the current and potential difference (commonly known as voltage) in the lumped element model of electrical circuits.
See Pull-up resistor and Kirchhoff's circuit laws
Logic gate
A logic gate is a device that performs a Boolean function, a logical operation performed on one or more binary inputs that produces a single binary output.
See Pull-up resistor and Logic gate
Microcontroller
A microcontroller (MC, UC, or μC) or microcontroller unit (MCU) is a small computer on a single integrated circuit.
See Pull-up resistor and Microcontroller
MOSFET
W and controlling a load of over 2000 W. A matchstick is pictured for scale. In electronics, the metal–oxide–semiconductor field-effect transistor (MOSFET, MOS-FET, or MOS FET) is a type of field-effect transistor (FET), most commonly fabricated by the controlled oxidation of silicon.
See Pull-up resistor and MOSFET
Ohm
The ohm (symbol: Ω, the uppercase Greek letter omega) is the unit of electrical resistance in the International System of Units (SI).
Open collector
Open collector, open drain, open emitter, and open source refer to integrated circuit (IC) output pin configurations that process the IC's internal function through a transistor with an exposed terminal that is internally unconnected (i.e. "open").
See Pull-up resistor and Open collector
Paul Horowitz
Paul Horowitz (born 1942) is an American physicist and electrical engineer, known primarily for his work in electronics design, as well as for his role in the search for extraterrestrial intelligence (see SETI).
See Pull-up resistor and Paul Horowitz
Power supply
A power supply is an electrical device that supplies electric power to an electrical load.
See Pull-up resistor and Power supply
RC circuit
A resistor–capacitor circuit (RC circuit), or RC filter or RC network, is an electric circuit composed of resistors and capacitors.
See Pull-up resistor and RC circuit
Resistor
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Pull-up resistor and resistor are Resistive components.
See Pull-up resistor and Resistor
Switch
In electrical engineering, a switch is an electrical component that can disconnect or connect the conducting path in an electrical circuit, interrupting the electric current or diverting it from one conductor to another.
See Pull-up resistor and Switch
The Art of Electronics
The Art of Electronics, by Paul Horowitz and Winfield Hill, is a popular electronics design reference textbook dealing with analog and digital electronics.
See Pull-up resistor and The Art of Electronics
Three-state logic
In digital electronics, a tri-state or three-state buffer is a type of digital buffer that has three stable states: a high output state, a low output state, and a high-impedance state.
See Pull-up resistor and Three-state logic
Transistor
A transistor is a semiconductor device used to amplify or switch electrical signals and power.
See Pull-up resistor and Transistor
Transistor–transistor logic
Transistor–transistor logic (TTL) is a logic family built from bipolar junction transistors.
See Pull-up resistor and Transistor–transistor logic
USB-C
USB-C, or USB Type-C, is a 24-pin connector (not a protocol) that supersedes previous USB connectors and can carry audio, video, and other data, e.g., to connect to monitors or external drives.
See Pull-up resistor and USB-C
Voltage
Voltage, also known as (electrical) potential difference, electric pressure, or electric tension is the difference in electric potential between two points.
See Pull-up resistor and Voltage
Winfield Hill
Winfield Hill is the Director of the Electronics Engineering Laboratory at the Rowland Institute at Harvard University.
See Pull-up resistor and Winfield Hill
See also
Resistive components
- Π pad
- Attenuator (electronics)
- Bleeder resistor
- Digital potentiometer
- Electrical ballast
- Electronic color code
- Force-sensing resistor
- High value resistors (electronics)
- Humistor
- Iron–hydrogen resistor
- L pad
- Liquid resistor
- Liquid rheostat
- List of electronic color code mnemonics
- Loss free resistor
- Möbius resistor
- Motorized potentiometer
- Photoresistor
- Polyfuse (PROM)
- Potentiometer
- Pull-up resistor
- Resettable fuse
- Resistance thermometer
- Resistance wire
- Resistor
- Stretch sensor
- String potentiometer
- T pad
- Thermistor
- Trimmer (electronics)
- Varistor
- Voltage-controlled resistor
- Zero-ohm link
References
[1] https://en.wikipedia.org/wiki/Pull-up_resistor
Also known as PD (resistor), PD resistor, PU (resistor), PU resistor, Pull down (resistor), Pull up (resistor), Pull up resistor, Pull-down (resistor), Pull-down resistor, Pull-up (resistor), Pull-up resistors, Pullup resistor.