Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites - PubMed

Affiliations

• PMID: 16386268
• DOI: 10.1016/j.jcis.2005.12.023

Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites

B C Ray. J Colloid Interface Sci. 2006.

Abstract

Weight change behavior of fiber-reinforced polymer composites in humid and thermal environments appears to be a complex phenomena. The state of fiber/matrix interface is believed to influence the nature of diffusion modes. A significant weakening often appears at the interface during the hygrothermal ageing. It effects the moisture uptake kinetics and also the reduction of mechanical properties. The importance of temperature at the time of conditioning plays an important role in environmental degradation of such composite materials. An attempt has been made here to evaluate the deleterious effect of temperature on shear strength of carbon/epoxy and glass/epoxy composites during hygrothermal conditionings. Mechanical tests were conducted at room temperature to assess the effectiveness of the relaxation process in the nullification of environmentally-induced damage in the composites.

Similar articles

• Effect of thermal cycling on composites reinforced with two differently sized silica-glass fibers.

  Meriç G, Ruyter IE. Meriç G, et al. Dent Mater. 2007 Sep;23(9):1157-63. doi: 10.1016/j.dental.2006.06.051. Epub 2006 Nov 21. Dent Mater. 2007. PMID: 17118440

• Moisture and gamma-ray irradiation effects on the mechanical properties of carbon fibre-reinforced plastics.

  Sekulić D, Bozić D, Babić B, Stasić J, Stevanović M. Sekulić D, et al. J Microsc. 2008 Dec;232(3):611-7. doi: 10.1111/j.1365-2818.2008.02126.x. J Microsc. 2008. PMID: 19094048

• Effect of glass fiber surface treatments on mechanical strength of epoxy based composite materials.

  Iglesias JG, González-Benito J, Aznar AJ, Bravo J, Baselga J. Iglesias JG, et al. J Colloid Interface Sci. 2002 Jun 1;250(1):251-60. doi: 10.1006/jcis.2002.8332. J Colloid Interface Sci. 2002. PMID: 16290658

• Environmental effects on fibre reinforced polymeric composites: evolving reasons and remarks on interfacial strength and stability.

  Sethi S, Ray BC. Sethi S, et al. Adv Colloid Interface Sci. 2015 Mar;217:43-67. doi: 10.1016/j.cis.2014.12.005. Epub 2014 Dec 19. Adv Colloid Interface Sci. 2015. PMID: 25578406 Review.

• A Critical Review on Hygrothermal and Sound Absorption Behavior of Natural-Fiber-Reinforced Polymer Composites.

  Bhuvaneswari V, Devarajan B, Arulmurugan B, Mahendran R, Rajkumar S, Sharma S, Mausam K, Li C, Eldin ET. Bhuvaneswari V, et al. Polymers (Basel). 2022 Nov 4;14(21):4727. doi: 10.3390/polym14214727. Polymers (Basel). 2022. PMID: 36365720 Free PMC article. Review.

Cited by

• Parameters Influencing Moisture Diffusion in Epoxy-Based Materials during Hygrothermal Ageing-A Review by Statistical Analysis.

  Gillet C, Tamssaouet F, Hassoune-Rhabbour B, Tchalla T, Nassiet V. Gillet C, et al. Polymers (Basel). 2022 Jul 12;14(14):2832. doi: 10.3390/polym14142832. Polymers (Basel). 2022. PMID: 35890607 Free PMC article. Review.

• Utilization of Mechanically Recycled Carbon Fibers in Vinyl Ester Composites.

  AlHarmoodi K, Idrisi AH, Mourad AI, Abu-Jdayil B. AlHarmoodi K, et al. Polymers (Basel). 2023 Feb 17;15(4):1016. doi: 10.3390/polym15041016. Polymers (Basel). 2023. PMID: 36850299 Free PMC article.

• Representative 2D-material-based nanocomposites and their emerging applications: a review.

  Qadir A, Le TK, Malik M, Amedome Min-Dianey KA, Saeed I, Yu Y, Choi JR, Pham PV. Qadir A, et al. RSC Adv. 2021 Jul 7;11(39):23860-23880. doi: 10.1039/d1ra03425a. eCollection 2021 Jul 6. RSC Adv. 2021. PMID: 35479005 Free PMC article. Review.

• Long-Term Bonding and Tensile Strengths of Carbon Textile Reinforced Mortar.

  Heins K, Kimm M, Olbrueck L, May M, Gries T, Kolkmann A, Ryu GS, Ahn GH, Kim HY. Heins K, et al. Materials (Basel). 2020 Oct 10;13(20):4485. doi: 10.3390/ma13204485. Materials (Basel). 2020. PMID: 33050400 Free PMC article.

• Non-Destructive Detection of Real Defects in Polymer Composites by Ultrasonic Testing and Recurrence Analysis.

  Ciecieląg K, Kęcik K, Skoczylas A, Matuszak J, Korzec I, Zaleski R. Ciecieląg K, et al. Materials (Basel). 2022 Oct 20;15(20):7335. doi: 10.3390/ma15207335. Materials (Basel). 2022. PMID: 36295400 Free PMC article.