Polypropylene film chemical and physical modifications by dielectric barrier discharge plasma treatment at atmospheric pressure - PubMed

Affiliations

• PMID: 18930244
• DOI: 10.1016/j.jcis.2008.09.062

Polypropylene film chemical and physical modifications by dielectric barrier discharge plasma treatment at atmospheric pressure

Frédéric Leroux et al. J Colloid Interface Sci. 2008.

Abstract

Dielectric barrier discharge (DBD) technologies have been used to treat a polypropylene film. Various parameters such as treatment speed or electrical power were changed in order to determine the treatment power impact at the polypropylene surface. Indeed, all the treatments were performed using ambient air as gas to oxidize the polypropylene surface. This oxidation level and the surface modifications during the ageing were studied by a wetting method and by X-ray photoelectron spectroscopy (XPS). Moreover polypropylene film surface topography was analyzed by atomic force microscopy (AFM) in order to observe the surface roughness modifications. These topographic modifications were correlated to the surface oxidation by measuring with a lateral force microscope (LFM) the surface heterogeneity. The low ageing effects and the surface reorganization are discussed.

Similar articles

• Protein adhesion and cell response on atmospheric pressure dielectric barrier discharge-modified polymer surfaces.

  D'Sa RA, Burke GA, Meenan BJ. D'Sa RA, et al. Acta Biomater. 2010 Jul;6(7):2609-20. doi: 10.1016/j.actbio.2010.01.015. Epub 2010 Jan 21. Acta Biomater. 2010. PMID: 20096386

• Effect of atmospheric-pressure plasma on adhesion characteristics of polyimide film.

  Park SJ, Lee HY. Park SJ, et al. J Colloid Interface Sci. 2005 May 1;285(1):267-72. doi: 10.1016/j.jcis.2004.11.062. J Colloid Interface Sci. 2005. PMID: 15797422

• A study of atmospheric-pressure CHF3/Ar plasma treatment on dielectric characteristics of polyimide films.

  Park SJ, Lee EJ, Kim BJ. Park SJ, et al. J Colloid Interface Sci. 2008 Mar 1;319(1):365-9. doi: 10.1016/j.jcis.2007.08.003. Epub 2007 Dec 20. J Colloid Interface Sci. 2008. PMID: 18082759

• Surface functionalization, oxygen depth profiles, and wetting behavior of PET treated with different nitrogen plasmas.

  López-Santos C, Yubero F, Cotrino J, González-Elipe AR. López-Santos C, et al. ACS Appl Mater Interfaces. 2010 Apr;2(4):980-90. doi: 10.1021/am100052w. ACS Appl Mater Interfaces. 2010. PMID: 20423118

• Sustainable Synthesis of Highly Functionalized Activated Carbon using Plasma Technology.

  Jayasinghe S, Pasan Siriwardena D, Munaweera I, Perera C, Kottegoda N. Jayasinghe S, et al. Chempluschem. 2022 Oct;87(10):e202200202. doi: 10.1002/cplu.202200202. Chempluschem. 2022. PMID: 36263986 Review.

Cited by

• Changes in Surface Characteristics of BOPP Foil after Treatment by Ambient Air Plasma Generated by Coplanar and Volume Dielectric Barrier Discharge.

  Šrámková P, Kelar Tučeková Z, Fleischer M, Kelar J, Kováčik D. Šrámková P, et al. Polymers (Basel). 2021 Nov 29;13(23):4173. doi: 10.3390/polym13234173. Polymers (Basel). 2021. PMID: 34883676 Free PMC article.

• Development of multilayer microcapsules by a phase coacervation method based on ionic interactions for textile applications.

  Chatterjee S, Salaün F, Campagne C. Chatterjee S, et al. Pharmaceutics. 2014 Jun 13;6(2):281-97. doi: 10.3390/pharmaceutics6020281. Pharmaceutics. 2014. PMID: 24932719 Free PMC article.

• Effect of Dielectric Barrier Discharge (DBD) Treatment on the Dielectric Properties of Poly(vinylidene fluoride)(PVDF)-Based Copolymer.

  Liu J, Zhou Y, Yi K, Zhang S, Shao T, Zhang C, Chu B. Liu J, et al. Polymers (Basel). 2020 Jun 18;12(6):1370. doi: 10.3390/polym12061370. Polymers (Basel). 2020. PMID: 32570697 Free PMC article.

• Modification of Physico-Chemical Properties of Acryl-Coated Polypropylene Foils for Food Packaging by Reactive Particles from Oxygen Plasma.

  Vukušić T, Vesel A, Holc M, Ščetar M, Jambrak AR, Mozetič M. Vukušić T, et al. Materials (Basel). 2018 Mar 3;11(3):372. doi: 10.3390/ma11030372. Materials (Basel). 2018. PMID: 29510480 Free PMC article.

• Treatment of Polymeric Films Used for Printed Electronic Circuits Using Ambient Air DBD Non-Thermal Plasma.

  Astanei D, Burlica R, Cretu DE, Olariu M, Stoica I, Beniuga O. Astanei D, et al. Materials (Basel). 2022 Mar 4;15(5):1919. doi: 10.3390/ma15051919. Materials (Basel). 2022. PMID: 35269150 Free PMC article.

LinkOut - more resources

• Full Text Sources

  • Elsevier Science

• Other Literature Sources

  • The Lens - Patent Citations Database

• Miscellaneous

  • NCI CPTAC Assay Portal