|
|
|
|
|
|
|
Dairy Barn
|
Older barns,
were usually built from lumber sawed from timber on the farm, although stone barns were sometimes built in New England and other areas where stone was a cheaper building material.
Prior to the 1900s, most barns were timber framed (also known as post and beam) forming very strong structures to withstand storms and heavy loads of animal feed.
From about 1900 to 1940, many large dairy barns were built in northern USA. These commonly have gambrel, or hip roofs to maximize the size of the hayloft above the dairy roof, and have become associated in the popular image of a dairy farm.
|
|
|
|
|
The advancements in dairy farming in the early 1900�s would greatly increase efficiently and production,
The new era of dairy barns were designed to offer the cow maximum comfort and the farmer many time saving conveniences.
While the manure handling and the milking equipment made some advancements since
early 1900�s many small dairy farms still
milk their herds in barns configured nearly one hundreds years ago.
|
Plank Frame replaces Mortise and Tenon
By the turn of the century there were many types of dairy barns, with many modifications of each type. But in the early 1900�s the plank frame barn, in one form or another, became the most popular.
The main reasons for the building of the plank frame barn were.
- The fact that it saves in cost of lumber.
- It provides far more storage room in the hayloft.
- Less labor intensive to build than any other type.
|
|
|
|
TOP
A Wisconsin barn raising (click to enlarge) Mortise and Tenon barns required a huge amount of labor.to erect.
The old-style heavy timber framing, the cutting of the mortise and tenon joints required much skill and labor.
This style of barn building wasn�t done by blueprint but by skills passed on (notice the large audience of children in the pictue)
|
LEFT
With the scarcity of heavy timbers and their increasing high cost, a new type of barn building is
introduced. This sequence of images shows a crew of three men building a modern dairy from the included blueprints.
|
|
|
|
Another big advantage to the new construction methods the Plank Frame barn offered over Mortise and Tenon was the new open style greatly aided use of modern hay carrying machinery.
While hay carrier were used in Mortise and Tenon barns It was much easier and
less labor intensive in barns with open centers. In the plank frame barn there are neither crossbeams nor heavy supporting timbers to interfere with unloading of hay.
|
The First Modern Barn Tools
|
Labor Saving Barn Tools
Some modernization in sanitary equipment was brought about from
government regulations for producers of certified milk. However, the wide use of modern barn equipment on the average farm is largely due to the saving of feed and labor and the additional comfort for the animals resulting from its employment.
Good barn equipment was no longer considered a luxury, but a necessity, which pays daily interest on investment by saving material,
time, and labor. The various laborsaving devices for the barn may be divided into 3 classes:
(1) conveniences for handling feed and litter;
(2) conveniences for handling stock;
(3) miscellaneous conveniences, which help to increase the efficiency of the barn. |
 |
|
 |
The Hay Carrier
The hay carrier was, perhaps, the first important laborsaving device invented for use in the barn. It made possible the storage of large quantities of hay in the barn and has introduced more economical types of construction for hay storage. At the turn of the century no large modern barn is complete without one.
The scarcity of labor during the haying season and the increased value of hay made it imperative that every means available to facilitate the handling and the saving of the hay crop.
The original hay carrier was operated on a wooden track. The steel track, of which there are many forms on the market, makes the carrier much easier to operate, and is greatly superior to the wooden one. Simplicity, durability, and strength are three important factors to consider in the selection of a hay carrier. It needed be simple, to be easily understood and operated. It also needed to be durable and strong enough to support the loads. Breakage during the haying season
could easily cause a partial or a complete loss of the hay crop.
|
|
Labor Saving Barn Tools
Litter carriers were a common site in large dairy barns, The majority of
Midwestern farms of 1900 had at least a small herd of milk cows. Most carriers
were designed with a track system. Track systems were available for almost any
situation and included accessories, such as right angle curves, switches and
other configurations to permit travel to all portions of a barn. Many times the
track system was used in dual roles including a feed car however the most common
use was to transport manure. For manure the track system extending outdoors for
dumping the loaded unit, either onto a dung heap or into a waiting manure spreader.
|
 |
 |
The rate, at which barns are disappearing, is nothing short of alarming. Visit part one of
the two part story documenting the process that rescued a Wisconsin barn from the
fate that has removed so many barns from our rural landscape.
Barn Restoration Part 1
|
|
Dairy Barn Industry Leader
|
The James Manufacturing Company was organized under the laws of Wisconsin in 1906. Although the company was comparatively
young to other established barn equipment manufactures. The James Manufacturing Company would become an industry
leader in dairy barn equipment. Successful and veteran barn equipment companies like Louden, Leader, Giant, Ney,
Meyer and Milwaukee found success in manufacturing Hay Tools. The James Manufacturing Company would become the
dairy barn equipment pioneer
The real beginning, however, was back on the James farm near Wales, Wis., where the first James stalls were made in the old blacksmith shop
on the farm. Later, more stalls were made in the village near by.
|
Born in the Barn
One day it happened that Mr. C. P. Goodrich saw the "new-fangled" stall in use on a farm where he was visiting and so impressed
was he with its sanitary features and labor saving devices that he drove over to see the inventor. As a result of the acquaintance
thus begun, a company was organized to handle the proposition on a large scale and the business moved to Ft. Atkinson Wisconsin.
At this stage of the history of the business, one man constituted the entire factory force, one girl handled the office work,
and the manager, Mr. James, worked part time in the shop, part time in the office and part time out on the road selling the
product of the little factory. Progressive dairymen quickly realized the value of equipment that would help keep their barns
clean and that would lessen barn work and within a couple of years a very successful little business was established.
|
Awards and Recognition
The Wisconsin State Board of Agriculture chose Mr. James' plans as the best from those submitted in open competition by architects and other experts. The Wisconsin State Board of Agriculture used the design as the model dairy barn at the Wisconsin State Fair Grounds.
Soon James Manufacturing Company would receive the Grand Prize or highest award that could possibly be given on complete dairy barn from the Great Panama-Pacific International Exposition at San Francisco. In addition to the Grand Prize, Gold Medals (the highest awards covering the specific articles) were awarded the James sanitary cow stalls, stanchions, bull pens, feed carriers, milk can carriers, feed trucks, and litter carriers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gothic Style Roof | |
|
|
From about 1900 to 1940, many large dairy barns were built in northern USA. These commonly have gambrel,
or hip roofs to maximize the size of the hayloft above the dairy roof, and have become associated in the popular image of a dairy farm.
Not as popular as the gambrel, or hip roof the Gothic roof dairy barn is still a common site in the rural area's in the dairy states. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Cream
Separator
| |
|
Invented in Germany in 1870's, the cream separator would become a fixture on virtually every dairy farm. By the 1920�s thirty American manufacturers.
were producing 200,000 hand-cranked cream separators a year. Including tractor manufacturers, stationary engine builders and retail giants like Sears Roebuck.
German inventor Dr De Laval�s cream separator that bore his name would become the benchmark all others were measured by.
|
|
|
|
|
|
|
|
|
|
|
|
|
Barn Copula
| |
 |
|
DAIRYMEN, generally, realize the full importance of pure air to the herd, because they know the condition in which an unventilated stable is found on a cold morning.
They know the air in such a barn is bad, and that the damp, frosty barn is an unhealthy place for the cattle. Early wooden cupolas were little more then decorations. By the early 1900�s the above example of a Jamesway cupolas was an important element in cow health
|
|
|
|
|
|
|
|
|
|
|
|
Hay Tools | |
|
|
Prior to the modernization of the dairy farming, most all labor saving barn devices were used in the hayloft area.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|